Ваше сообщение успешно отправлено
en
ru

Quality parameters of the barbed wire correspond to the requirements of EN 10223-1 except for zinc content requirements and there are also additional requirements, depending on market demands.

The barbed wire is produced from zinc-coated wire according to GOST 3282-74 class 1, normal accuracy of production, with tensile strength 400-500 N/mm2.

the barbed wire consist of two twisted together wires in one direction with the same twists step equal to 50±10mm.

 

Wire diameter for strand, mm Wire diameter for barbs, mm Distance between barbs, mm Theoretical weight of 1m of wire, g Coil weight, kg/ lenght of wire in coil, m
10 15 20 30
 1.6  1.6  152  43  233  349  465  698
 1.6  1.6  127  44  227  341  455  682
 1.6  1.6  102  46  217  326  435  652
 1.7  1.5  152  46  217  326  435  652
 1.7  1.5  127  47  213  319  426  638
 1.7  1.5  102  49  204  306  408  612
 2.0  2.0  152  67  149  224  299  448
 2.0  2.0  127  69  145  217  290  435
 2.0  2.0  102  73  137  206  274  411
 2.2  2.0  152  79  127  190  253  380
 2.2  2.0  127  81  123  185  247  370
 2.2  2.0  102  85  118  176  235  353
 2.2  2.2  152  82  122  183  244  366
 2.2  2.2  127  85  118  176  235  353
 2.2  2.2  102  90  111  167  222  333
 2.5  2.0  152  99  101  152  202  303
 2.5  2.0  127  101  99  148  198  297
 2.5  2.0  102  105  95  143  190  286
 2.5  2.5  152  107  94  140  187  280
 2.5  2.5  102  117  85  171  171  256

 

Coils dimensions:

Weight, kg 10 15 20 30
Outer Diameter, mm 230±10 260±10 280±10 380±10
Inner Diameter, mm 135 135 135 135
Height, mm 310 310 310 310

Steel Grade: St1, St2 of all degrees of deoxidization are according to DSTU 2770-94; 1006, 1008 are according to SOU MPP 77.140-236:2008

Wire lenght in coil: 100m, 200m, 250m, 400m

Package:coils weight of 10-30kg, packed on pallet, net weight 600-720kg.