Ваше сообщение успешно отправлено
en
ru
Nominal diameter, mm Wire diameter tolerance, mm Tensile strength, N/mm (kg/mm2) Relative elongation, %, not less Type of shipment - coils weight, kg
0.5 - 0.75 -0.04     290-490 (30-50)   15 small coils of free winding of 20-40
0.8 - 1.0 -0.05 15

small coils of free winding of 25-80;
heavy-weight coils of 550±50; 950±50 of conic winding;
coils of "Rosette"
150±10;

“Rosette-sandwich” up to 300

1.1 - 1.2 -0.06 15
1.3 - 1.5 -0.10 15
1.6 - 2.0 -0.10 15 small coils of free winding of  30-80; 100±10;
heavy-weight coils of 950±50;
coils of "Rosette" , “
Rosette-sandwich” up to 800;
2.2 - 2.5 -0.12 15
2.8 - 3.2 -0.12 20
3.5 - 4.5 -0.16 20

small coils of free winding of  50-80; 100±10;

heavy-weight coils of 950±50;

coils of "Rosette" , “Rosette-sandwich” up to 800 (up to diam. 4.0mm)

5.0 - 6.0 -0.16 20
7.0 - 13.0 -0.20 20 coils of free winding of  300-500

STEEL GRADE: St1, St2, St3 of all degrees od deoxidization are according to DSTU 2770-94; 1006, 1008 are according to SOU MPP 77.140-236:2008

At the customer's request it ia possible to produce the wire with more strict requirements regarding the geometry and tensile strength, without oxide scale in the "light annealing" mode.

The production of oiled wire is possible.

By the additional agreement with the Supplier the production of the wire with intermediate diameters is possible.

The production of the wire with two-sided ultimate deviation is possible. The diameter tolerance should correspond to the values, stated in the table.

Dimensions of coils and packages of low-carbon general purpose steel wire

Wire diameter, mm Coil weight, kg Outer diameter of coil, mm Inner diameter of coil, mm Height, mm Quantity of coils in package, pcs. Outer diameter of package, mm Inner diameter of package, mm Height of package, mm
0.60 - 1.50 25 440 ±10 250 ±10 100 ±10 8 460 ±10 220 ±10 520 ±20
440 ±10* 240 ±10* 700 ±30*
50 450 ±10 230 ±10 140 ±10 6 470 ±10 200 ±20 430 ±30
450 ±10* 230 ±10* 610 ±20*
80 460 ±20 220 ±10 200 ±10 5 470 ±20 200 ±20 480 ±30
450 ±10* 230 ±10* 780 ±40*
1.00 - 1.50 550 ±50 710 ±10 450 420 ±10        
0.60 - 1.50 950 ±50 конусная намотка 700 ±10 верх 355 580        
745 ±10 основание
1.60 - 2.80 50 620 ±20 470 ±20 80 ±20 8 640 ±20 440 ±20 480 ±60
630 ±20* 410 ±20* 850 ±30*
80 650 ±20 460 ±20 130 ±20 5 700 ±20 410 ±20 460 ±60
660 ±20* 420 ±20* 700 ±60*
100 ±10 660 ±20 460 ±20 150 ±20 5 700 ±20 410 ±20 460 ±60
660 ±20* 420 ±20* 700 ±60*
3.00 - 6.00 50 620 ±20 470 ±20 90 ±20 8 640 ±20 440 ±20 510 ±60
630 ±20* 410 ±20* 870 ±30*
80 650 ±20 460 ±20 140 ±20 5 700 ±20 410 ±20 510 ±60
660 ±20* 420 ±20* 720 ±60*
100 ±10 660 ±20 460 ±20 160 ±20 5 700 ±20 410 ±20 510 ±60
660 ±20* 420 ±20* 720 ±60*
1.60 - 6.00 950 ±50 830 ±20 450 ±10 440 ±20        
5.50 - 8.00 80-300 750 500 80-300        
5.50 - 10.00 80-300 850 600 80-300        
6.10 - 13.00 500 1100 ±100 520 ±20 400        

* - dimensions of heat-treated steel wire packages.

Heat-treated wire is also delivered in coils of «Rosette» type of the following sizes

Parameter Rosette size
Wire diameter, mm 0.8 - 1.5 1.6 - 4.0
Weight, kg 150 ±10 500±50 800±10
Outer diameter, mm 450 ±10 810 ±10 810 ±20
Inner diameter, mm 225 ±20 370 ±10 370 ±10
Height, mm 480 ±20 430 ±20 850 ±20

Production of heat-treaded wire is possible in coils of rectangular section «Brehmen rings»

with the following tecnical requirements:

- diameters from 2.00 up to 5.00mm;

- tensile strength 300-400 N/mm2;

 Overall dimensions of coils  «Brehmen rings»

Coil weight, kg Inner diameter, mm Outer diameter, mm Height, mm

20

100

250

100

30

200

330

150

40

213

330+5

155+2

 Delivery: coils weight - "Brehmen rings" - on pallet 960kg, 1080kg.

 

Dimensions of coils with a special form winding of weight 200 grams

 Габариты мотков с намоткой специальной формы массой 200 грамм

Sizes acc.to drawing in mm

a b c d e
44-52 17-20 39-43 23-26 65-70

Type of packaging: plastic buckets of 20 kg (100 coils)

Type of shipment: on pallet, net weight 720 kg (36 buckets)

 

Type of shipment Weight, kg Material or combination of materials for packing
 Plastic spools  К-250А  Up to 20  Without additional packing
 Stretch
 Coil 20-100  Without additional packing
 Stretch (for wire diam (0,5-0,8) mm
 polyethylene film
 inhibited film
 Package coils
Heavy-weight coil
Heavy-weight coil (conical winding)
Heavy-weight coil
“Rosette”
180-500
550±50
950±50
950±50
Up to 1000
 Without additional packing
 Stretch  (for heavy-weight coils of conical winding
 polyethylene film
 inhibited film
 polypropylene sleeve
 inhibited film  + polypropylene sleeve
 polyethylene film + polypropylene sleeve
 two-layer sleeve (polypropylene with inhibited paper)